MHD N55 E-series

MHD N55 E-series 介绍

MHD N55 E-series

MHD Flasher is the first Android handheld application to bring ECU tuning and monitoring to the BMW N55 engine for E series. The MHD Flasher reveals the good margin of power BMW left on the table with the N55 while still retaining the sophistication of the original engine management program.→ Easy to install Connect any compatible Android device to your car using a standard K+Dcan cable along with an OTG USB adapter, install one of the pre-purchased MHD maps and enjoy the power and performance benefits of the MHD maps by Twisted Tuning. → Keep an eye on the tuningMonitor your engine behavior using a configurable gauges layout to keep an eye on any of the 50+ engine monitors like oil temp, boost pressure, actual load or individual cylinder ignition timing. Activate the logging mode to save up to 50 monitors to a standard CSV file for later analysis. Track issues by reading the error codes, and delete them once resolved.→ Flash your ECU back to a stock anytime, as often as you need to. No ECU backup is needed.→ Custom tuning supportAs an alternative to built-in maps, many tuners can provide advanced custom mapping for those who have higher or special performance needs. Main features description:═══ Flasher module ═══- Flash built-in maps (purchased separately), custom user-tuned .BIN files or JB4 flash maps.- Provides an ever growing list of handy options like PPK exhaust burble duration or cold start noise reduction.- Read / delete engine trouble codes.- Reset the main DME adaptation values.- 4 minutes map switching; initial install time: 33 mins (this will be improved later).═══ Monitor module ═══- Extensive logging values list, up to 50 values at the same time.- Save logging session to .CSV files- Integrated csv log viewer- Up to 8 configurable gauges═══ Optional MHD maps packs ═══- Maps by Twisted tuning- Stage 1 pack. Eight maps: 4 fuel octane variants, stock / upgraded FMIC variants.- Stage 2 pack. Eight maps: 4 fuel octane variants, stock / upgraded FMIC variants. High flow downpipes recommended.- Ethanol mix map (e30). FMIC+DPs recommended.Supported vehicles: N55 equipped Exx series. !!! Important !!! Vehicle equipped with a MEVD1726 DME (built dating from around 03-2012) need a once time DME removal and bench flash to allow OBD flashing. See FAQ below. 2010-2013 135i, 135is and 335i2013-2015 X1 35i2010-2013 X5 35i2011–2014 X6 35iThis racing product is for competition closed course use only.Required hardware:- 1 device running Android 3.2 and up, USB OTG compatible.- 1 K+Dcan cable. See page 5 of the user manual for a recommended cable: http://www.twisted-visionz.com/mhdguide- 1 USB OTG cable.Price list (licenses are VIN Locked and stored by Google along your Play store account):- Flasher module: $199- MHD maps packs: $49 each. Requires the Flasher module.- Monitor module: $69FAQQ: Does my Android device need to be permanently plugged to the OBD port?A: No. Once a flash is performed you can unplug your device.Q: Do I lose my licenses if I delete the app or the Android device breaks?A: No. licenses are stored online by Google, you can use your purchases on another device as long as you use the same account on Play store.Q: Do I need to purchase a new license each time I flash a map?A: No, you can ref lash as many times as needed.Q: Is a battery charger required?A: It is highly recommended for long flashes (install, uninstall). A healthy battery will handle short flashes (map changes) fine but the use of a battery charger remains recommended.Q: How can I determine if the DME is directly flashable or needs a one time bench flash?A: got to http://www.realoem.com/bmw/enUS/select and enter the last 7 digits of your VIN in serial number. Click Browse parts the ENGINE ELECTRICAL SYSTEM and check both CONTROL UNITS > MEVD1726 section. If the it says "No parts found matching your car." you have a MEVD172 which is directly flashable.

来自应用汇: MHD N55 E-series //www.stclairws.com/app/com.mhd.flasher.n55?from=spi-desc

MHD N55 E-series 历史版本

MHD N55 E-series 版本更新

v1.8

✓ 1.60 maps update (better boost control).

✓ Improved the coolant target flash option. When active, 95c in Normal and in Sport either 85c (performance setting) or 80c (track setting).

✓ Dorch hpfp flash option (for late E models).

✓ User manual update.



v1.7

? Direct OBD flash on Late E series - no unlock needed anymore! ?

✓ Updated e50 map for N54 pump equipped engines.

✓ Added a "send report per email" button in read codes.

✓ Improved MHD Wifi adapter support

MHD N55 E-series 类似软件

用户对 MHD N55 E-series 的评论

当前还没有用户评论 ㄟ( ▔, ▔ )ㄏ

亲，想发表评论请下载[应用汇手机客户端]哦～